            Extended GRAFX II Tool File Library - Release #1
            ------------------------------------------------

A complete selection of drill tool files (.TLL) is supplied with this update
for optional installation in your tool GRAFX II tool library.  The
selection is more complete than the sample selection of tools initially
installed. The new files are compatible with GRAFX II Version 1.14A and
later.

The new drill type files are specified as mill and turning tool files and
default to the proper display orientation.  This eliminates the need for a
separate milling and turning drill files.

All the tool file parameters are specified for the GRAFX II automatic
drill depth calculator and the feed and speed calculator.

A new file/tool name convention is used with these tools to distinguish
the new files from the tool files previously supplied with the system.

Your existing tool files can be individually updated by loading them into
GRAFX II and editing the parameters and geometry as required.

The bell type center drill/countersinks are pre programmed for a depth value
that will bring the tool to the median diameter of bell section.

While great care has been taken in the creation of these new TLL files,
you should verify all parameter information when loading a tool file the
first time and before executing GRAFX II machining operations.

INSTALLATION:

Make sure you are in the GRAFX II sub-directory that contains your tool files.
Place the installation disk #2 in your A: drive.  To install all the files type
A:NEWTOOL1 and hit the ENTER key.  This will extract all files from the disk.

To extract specific files you can use wildcard construction.


Example: A:NEWTOOL1  DR#*.*       -  Extract all files beginning with DR#
                                     (number size drill)
         A:NEWTOOL1  DR1000.*     -  Extract only the DR1000.TLL file on
                                     (1" Diameter drill only)
         A:NEWTOOL1  CD1600*.*     - Extract all files beginning with CD1600
                                     (standard type center drill/countersinks)


After extraction you may rename the files using standard DOS file names

Refer to your GRAFX II manual for instructions about installing extended file
lists to update your tool file menus.



                      Drill File Names and Descriptions
                      ---------------------------------


COMBINATION CENTER DRILL / COUNTERSINK - 60 DEGREE - STANDARD TYPE

CD1600A.TLL - #000 CENTER DRILL / COUNTERSINK - 60 DEG - .0200"-.1250" CD
CD1600B.TLL - #00  CENTER DRILL / COUNTERSINK - 60 DEG - .0250"-.1250" CD
CD1600C.TLL - #0   CENTER DRILL / COUNTERSINK - 60 DEG - .0313"-.1250" CD
CD1600D.TLL - #1   CENTER DRILL / COUNTERSINK - 60 DEG - .0469"-.1250" CD
CD1600E.TLL - #2   CENTER DRILL / COUNTERSINK - 60 DEG - .0781"-.1875" CD
CD1600F.TLL - #3   CENTER DRILL / COUNTERSINK - 60 DEG - .1094"-.2500" CD
CD1600G.TLL - #4   CENTER DRILL / COUNTERSINK - 60 DEG - .1250"-.3125" CD
CD1600H.TLL - #5   CENTER DRILL / COUNTERSINK - 60 DEG - .1875"-.4375" CD
CD1600I.TLL - #6   CENTER DRILL / COUNTERSINK - 60 DEG - .2188"-.5000" CD
CD1600J.TLL - #7   CENTER DRILL / COUNTERSINK - 60 DEG - .2500"-.6250" CD
CD1600K.TLL - #8   CENTER DRILL / COUNTERSINK - 60 DEG - .3125"-.7500" CD


COMBINATION CENTER DRILL / COUNTERSINK - 60 DEGREE - BELL TYPE

CD1601A.TLL - #11  BELL CENTER DRILL / COUNTERSINK - 60 DEG - .1120" CD
CD1601B.TLL - #12  BELL CENTER DRILL / COUNTERSINK - 60 DEG - .1680" CD
CD1601C.TLL - #13  BELL CENTER DRILL / COUNTERSINK - 60 DEG - .2250" CD
CD1601D.TLL - #14  BELL CENTER DRILL / COUNTERSINK - 30 DEG - .2820" CD
CD1601E.TLL - #15  BELL CENTER DRILL / COUNTERSINK - 60 DEG - .3940" CD
CD1601F.TLL - #16  BELL CENTER DRILL / COUNTERSINK - 60 DEG - .4500" CD
CD1601G.TLL - #17  BELL CENTER DRILL / COUNTERSINK - 60 DEG - .5620" CD
CD1601H.TLL - #18  BELL CENTER DRILL / COUNTERSINK - 60 DEG - .6750" CD


FRACTIONAL SIZE DRILLS - JOBBERS LENGTH

DR0015.TLL  - 0.0156" DIA TWIST DRILL -  1/64   - 118 DPA - RH
DR0031.TLL  - 0.0312" DIA TWIST DRILL -  1/32   - 118 DPA - RH
DR0046.TLL  - 0.0469" DIA TWIST DRILL -  3/64   - 118 DPA - RH
DR0062.TLL  - 0.0625" DIA TWIST DRILL -  1/16   - 118 DPA - RH
DR0078.TLL  - 0.0781" DIA TWIST DRILL -  5/64   - 118 DPA - RH
DR0093.TLL  - 0.0937" DIA TWIST DRILL -  3/32   - 118 DPA - RH
DR0109.TLL  - 0.1094" DIA TWIST DRILL -  7/64   - 118 DPA - RH
DR0125.TLL  - 0.1250" DIA TWIST DRILL -  1/8    - 118 DPA - RH
DR0140.TLL  - 0.1406" DIA TWIST DRILL -  9/64   - 118 DPA - RH
DR0156.TLL  - 0.1562" DIA TWIST DRILL -  5/32   - 118 DPA - RH
DR0171.TLL  - 0.1719" DIA TWIST DRILL -  11/64  - 118 DPA - RH
DR0187.TLL  - 0.1875" DIA TWIST DRILL -  3/16   - 118 DPA - RH
DR0203.TLL  - 0.2031" DIA TWIST DRILL -  13/64  - 118 DPA - RH
DR0218.TLL  - 0.2188" DIA TWIST DRILL -  7/32   - 118 DPA - RH
DR0234.TLL  - 0.2344" DIA TWIST DRILL -  15/64  - 118 DPA - RH
DR0250.TLL  - 0.2500" DIA TWIST DRILL -  1/4    - 118 DPA - RH
DR0265.TLL  - 0.2656" DIA TWIST DRILL -  17/64  - 118 DPA - RH
DR0281.TLL  - 0.2813" DIA TWIST DRILL -  9/32   - 118 DPA - RH
DR0296.TLL  - 0.2969" DIA TWIST DRILL -  19/64  - 118 DPA - RH
DR0312.TLL  - 0.3125" DIA TWIST DRILL -  5/16   - 118 DPA - RH
DR0328.TLL  - 0.3281" DIA TWIST DRILL -  21/64  - 118 DPA - RH
DR0343.TLL  - 0.3438" DIA TWIST DRILL -  11/32  - 118 DPA - RH
DR0359.TLL  - 0.3594" DIA TWIST DRILL -  23/64  - 118 DPA - RH
DR0375.TLL  - 0.3750" DIA TWIST DRILL -  3/8    - 118 DPA - RH
DR0390.TLL  - 0.3906" DIA TWIST DRILL -  25/64  - 118 DPA - RH
DR0406.TLL  - 0.4062" DIA TWIST DRILL -  13/32  - 118 DPA - RH
DR0422.TLL  - 0.4219" DIA TWIST DRILL -  27/64  - 118 DPA - RH
DR0437.TLL  - 0.4375" DIA TWIST DRILL -  7/16   - 118 DPA - RH
DR0453.TLL  - 0.4531" DIA TWIST DRILL -  29/64  - 118 DPA - RH
DR0468.TLL  - 0.4688" DIA TWIST DRILL -  15/32  - 118 DPA - RH
DR0484.TLL  - 0.4844" DIA TWIST DRILL -  31/64  - 118 DPA - RH
DR0500.TLL  - 0.5000" DIA TWIST DRILL -  1/2    - 118 DPA - RH
DR0515.TLL  - 0.5156" DIA TWIST DRILL -  33/64  - 118 DPA - RH
DR0531.TLL  - 0.5312" DIA TWIST DRILL -  17/32  - 118 DPA - RH
DR0546.TLL  - 0.5469" DIA TWIST DRILL -  35/64  - 118 DPA - RH
DR0562.TLL  - 0.5625" DIA TWIST DRILL -  9/16   - 118 DPA - RH
DR0578.TLL  - 0.5781" DIA TWIST DRILL -  37/64  - 118 DPA - RH
DR0593.TLL  - 0.5938" DIA TWIST DRILL -  19/32  - 118 DPA - RH
DR0609.TLL  - 0.6094" DIA TWIST DRILL -  39/64  - 118 DPA - RH
DR0625.TLL  - 0.6250" DIA TWIST DRILL -  5/8    - 118 DPA - RH
DR0640.TLL  - 0.6406" DIA TWIST DRILL -  41/64  - 118 DPA - RH
DR0656.TLL  - 0.6562" DIA TWIST DRILL -  21/32  - 118 DPA - RH
DR0671.TLL  - 0.6719" DIA TWIST DRILL -  43/64  - 118 DPA - RH
DR0687.TLL  - 0.6875" DIA TWIST DRILL -  11/16  - 118 DPA - RH
DR0703.TLL  - 0.7031" DIA TWIST DRILL -  45/64  - 118 DPA - RH
DR0718.TLL  - 0.7188" DIA TWIST DRILL -  23/32  - 118 DPA - RH
DR0734.TLL  - 0.7344" DIA TWIST DRILL -  47/64  - 118 DPA - RH
DR0750.TLL  - 0.7500" DIA TWIST DRILL -  3/4    - 118 DPA - RH
DR0765.TLL  - 0.7656" DIA TWIST DRILL -  49/64  - 118 DPA - RH
DR0781.TLL  - 0.7812" DIA TWIST DRILL -  25/32  - 118 DPA - RH
DR0796.TLL  - 0.7969" DIA TWIST DRILL -  51/64  - 118 DPA - RH
DR0812.TLL  - 0.8125" DIA TWIST DRILL -  13/16  - 118 DPA - RH
DR0828.TLL  - 0.8281" DIA TWIST DRILL -  53/64  - 118 DPA - RH
DR0843.TLL  - 0.8438" DIA TWIST DRILL -  27/32  - 118 DPA - RH
DR0859.TLL  - 0.8594" DIA TWIST DRILL -  55/64  - 118 DPA - RH
DR0875.TLL  - 0.8750" DIA TWIST DRILL -  7/8    - 118 DPA - RH
DR0890.TLL  - 0.8906" DIA TWIST DRILL -  57/64  - 118 DPA - RH
DR0906.TLL  - 0.9062" DIA TWIST DRILL -  29/32  - 118 DPA - RH
DR0921.TLL  - 0.9219" DIA TWIST DRILL -  59/64  - 118 DPA - RH
DR0937.TLL  - 0.9375" DIA TWIST DRILL -  15/16  - 118 DPA - RH
DR0953.TLL  - 0.9531" DIA TWIST DRILL -  61/64  - 118 DPA - RH
DR0968.TLL  - 0.9688" DIA TWIST DRILL -  31/32  - 118 DPA - RH
DR0984.TLL  - 0.9844" DIA TWIST DRILL -  63/64  - 118 DPA - RH
DR1000.TLL  - 1.0000" DIA TWIST DRILL -    1    - 118 DPA - RH
DR1015.TLL  - 1.0156" DIA TWIST DRILL - 1-1/64  - 118 DPA - RH
DR1031.TLL  - 1.0312" DIA TWIST DRILL - 1-1/32  - 118 DPA - RH
DR1046.TLL  - 1.0469" DIA TWIST DRILL - 1-3/64  - 118 DPA - RH
DR1062.TLL  - 1.0625" DIA TWIST DRILL - 1-1/16  - 118 DPA - RH
DR1078.TLL  - 1.0781" DIA TWIST DRILL - 1-5/64  - 118 DPA - RH
DR1093.TLL  - 1.0938" DIA TWIST DRILL - 1-3/32  - 118 DPA - RH
DR1109.TLL  - 1.1094" DIA TWIST DRILL - 1-7/64  - 118 DPA - RH
DR1125.TLL  - 1.1250" DIA TWIST DRILL - 1-1/8   - 118 DPA - RH
DR1140.TLL  - 1.1406" DIA TWIST DRILL - 1-9/64  - 118 DPA - RH
DR1156.TLL  - 1.1562" DIA TWIST DRILL - 1-5/32  - 118 DPA - RH
DR1171.TLL  - 1.1719" DIA TWIST DRILL - 1-11/64 - 118 DPA - RH
DR1187.TLL  - 1.1875" DIA TWIST DRILL - 1-3/16  - 118 DPA - RH
DR1203.TLL  - 1.2031" DIA TWIST DRILL - 1-13/64 - 118 DPA - RH
DR1211.TLL  - 1.2118" DIA TWIST DRILL - 1-7/32  - 118 DPA - RH
DR1234.TLL  - 1.2344" DIA TWIST DRILL - 1-15/64 - 118 DPA - RH
DR1250.TLL  - 1.2500" DIA TWIST DRILL - 1-1/4   - 118 DPA - RH


NUMBER SIZE DRILLS - JOBBERS LENGTH

DR#01.TLL   - 0.2280" DIA TWIST DRILL -  # 1  - 118 DPA - RH
DR#02.TLL   - 0.2210" DIA TWIST DRILL -  # 2  - 118 DPA - RH
DR#03.TLL   - 0.2130" DIA TWIST DRILL -  # 3  - 118 DPA - RH
DR#04.TLL   - 0.2090" DIA TWIST DRILL -  # 4  - 118 DPA - RH
DR#05.TLL   - 0.2055" DIA TWIST DRILL -  # 5  - 118 DPA - RH
DR#06.TLL   - 0.2040" DIA TWIST DRILL -  # 6  - 118 DPA - RH
DR#07.TLL   - 0.2010" DIA TWIST DRILL -  # 7  - 118 DPA - RH
DR#08.TLL   - 0.1990" DIA TWIST DRILL -  # 8  - 118 DPA - RH
DR#09.TLL   - 0.1960" DIA TWIST DRILL -  # 9  - 118 DPA - RH
DR#10.TLL   - 0.1935" DIA TWIST DRILL -  #10  - 118 DPA - RH
DR#11.TLL   - 0.1910" DIA TWIST DRILL -  #11  - 118 DPA - RH
DR#12.TLL   - 0.1890" DIA TWIST DRILL -  #12  - 118 DPA - RH
DR#13.TLL   - 0.1850" DIA TWIST DRILL -  #13  - 118 DPA - RH
DR#14.TLL   - 0.1820" DIA TWIST DRILL -  #14  - 118 DPA - RH
DR#15.TLL   - 0.1800" DIA TWIST DRILL -  #15  - 118 DPA - RH
DR#16.TLL   - 0.1770" DIA TWIST DRILL -  #16  - 118 DPA - RH
DR#17.TLL   - 0.1730" DIA TWIST DRILL -  #17  - 118 DPA - RH
DR#18.TLL   - 0.1695" DIA TWIST DRILL -  #18  - 118 DPA - RH
DR#19.TLL   - 0.1660" DIA TWIST DRILL -  #19  - 118 DPA - RH
DR#20.TLL   - 0.1610" DIA TWIST DRILL -  #20  - 118 DPA - RH
DR#21.TLL   - 0.1590" DIA TWIST DRILL -  #21  - 118 DPA - RH
DR#22.TLL   - 0.1570" DIA TWIST DRILL -  #22  - 118 DPA - RH
DR#23.TLL   - 0.1540" DIA TWIST DRILL -  #23  - 118 DPA - RH
DR#24.TLL   - 0.1520" DIA TWIST DRILL -  #24  - 118 DPA - RH
DR#25.TLL   - 0.1495" DIA TWIST DRILL -  #25  - 118 DPA - RH
DR#26.TLL   - 0.1470" DIA TWIST DRILL -  #26  - 118 DPA - RH
DR#27.TLL   - 0.1440" DIA TWIST DRILL -  #27  - 118 DPA - RH
DR#28.TLL   - 0.1405" DIA TWIST DRILL -  #28  - 118 DPA - RH
DR#29.TLL   - 0.1360" DIA TWIST DRILL -  #29  - 118 DPA - RH
DR#30.TLL   - 0.1285" DIA TWIST DRILL -  #30  - 118 DPA - RH
DR#31.TLL   - 0.1200" DIA TWIST DRILL -  #31  - 118 DPA - RH
DR#32.TLL   - 0.1160" DIA TWIST DRILL -  #32  - 118 DPA - RH
DR#33.TLL   - 0.1130" DIA TWIST DRILL -  #33  - 118 DPA - RH
DR#34.TLL   - 0.1110" DIA TWIST DRILL -  #34  - 118 DPA - RH
DR#35.TLL   - 0.1100" DIA TWIST DRILL -  #35  - 118 DPA - RH
DR#36.TLL   - 0.1065" DIA TWIST DRILL -  #36  - 118 DPA - RH
DR#37.TLL   - 0.1040" DIA TWIST DRILL -  #37  - 118 DPA - RH
DR#38.TLL   - 0.1015" DIA TWIST DRILL -  #38  - 118 DPA - RH
DR#39.TLL   - 0.0995" DIA TWIST DRILL -  #39  - 118 DPA - RH
DR#40.TLL   - 0.0980" DIA TWIST DRILL -  #40  - 118 DPA - RH
DR#41.TLL   - 0.0960" DIA TWIST DRILL -  #41  - 118 DPA - RH
DR#42.TLL   - 0.0935" DIA TWIST DRILL -  #42  - 118 DPA - RH
DR#43.TLL   - 0.0890" DIA TWIST DRILL -  #43  - 118 DPA - RH
DR#44.TLL   - 0.0860" DIA TWIST DRILL -  #44  - 118 DPA - RH
DR#45.TLL   - 0.0820" DIA TWIST DRILL -  #45  - 118 DPA - RH
DR#46.TLL   - 0.0810" DIA TWIST DRILL -  #46  - 118 DPA - RH
DR#47.TLL   - 0.0785" DIA TWIST DRILL -  #47  - 118 DPA - RH
DR#48.TLL   - 0.0760" DIA TWIST DRILL -  #48  - 118 DPA - RH
DR#49.TLL   - 0.0730" DIA TWIST DRILL -  #49  - 118 DPA - RH
DR#50.TLL   - 0.0700" DIA TWIST DRILL -  #50  - 118 DPA - RH
DR#51.TLL   - 0.0670" DIA TWIST DRILL -  #51  - 118 DPA - RH
DR#52.TLL   - 0.0635" DIA TWIST DRILL -  #52  - 118 DPA - RH
DR#53.TLL   - 0.0595" DIA TWIST DRILL -  #53  - 118 DPA - RH
DR#54.TLL   - 0.0550" DIA TWIST DRILL -  #54  - 118 DPA - RH
DR#55.TLL   - 0.0520" DIA TWIST DRILL -  #55  - 118 DPA - RH
DR#56.TLL   - 0.0465" DIA TWIST DRILL -  #56  - 118 DPA - RH
DR#57.TLL   - 0.0430" DIA TWIST DRILL -  #57  - 118 DPA - RH
DR#58.TLL   - 0.0420" DIA TWIST DRILL -  #58  - 118 DPA - RH
DR#59.TLL   - 0.0410" DIA TWIST DRILL -  #59  - 118 DPA - RH
DR#60.TLL   - 0.0400" DIA TWIST DRILL -  #60  - 118 DPA - RH
DR#61.TLL   - 0.0390" DIA TWIST DRILL -  #61  - 118 DPA - RH
DR#62.TLL   - 0.0380" DIA TWIST DRILL -  #62  - 118 DPA - RH
DR#63.TLL   - 0.0370" DIA TWIST DRILL -  #63  - 118 DPA - RH
DR#64.TLL   - 0.0360" DIA TWIST DRILL -  #64  - 118 DPA - RH
DR#65.TLL   - 0.0350" DIA TWIST DRILL -  #65  - 118 DPA - RH
DR#66.TLL   - 0.0330" DIA TWIST DRILL -  #66  - 118 DPA - RH
DR#67.TLL   - 0.0320" DIA TWIST DRILL -  #67  - 118 DPA - RH
DR#68.TLL   - 0.0310" DIA TWIST DRILL -  #68  - 118 DPA - RH
DR#69.TLL   - 0.0292" DIA TWIST DRILL -  #69  - 118 DPA - RH
DR#70.TLL   - 0.0280" DIA TWIST DRILL -  #70  - 118 DPA - RH
DR#71.TLL   - 0.0260" DIA TWIST DRILL -  #71  - 118 DPA - RH
DR#72.TLL   - 0.0250" DIA TWIST DRILL -  #72  - 118 DPA - RH
DR#73.TLL   - 0.0240" DIA TWIST DRILL -  #73  - 118 DPA - RH
DR#74.TLL   - 0.2250" DIA TWIST DRILL -  #74  - 118 DPA - RH
DR#75.TLL   - 0.0210" DIA TWIST DRILL -  #75  - 118 DPA - RH
DR#76.TLL   - 0.0200" DIA TWIST DRILL -  #76  - 118 DPA - RH
DR#77.TLL   - 0.0180" DIA TWIST DRILL -  #77  - 118 DPA - RH
DR#78.TLL   - 0.0160" DIA TWIST DRILL -  #78  - 118 DPA - RH
DR#79.TLL   - 0.0145" DIA TWIST DRILL -  #79  - 118 DPA - RH
DR#80.TLL   - 0.0135" DIA TWIST DRILL -  #80  - 118 DPA - RH
DR#81.TLL   - 0.0130" DIA TWIST DRILL -  #81  - 118 DPA - RH
DR#82.TLL   - 0.0125" DIA TWIST DRILL -  #82  - 118 DPA - RH
DR#83.TLL   - 0.0120" DIA TWIST DRILL -  #83  - 118 DPA - RH
DR#84.TLL   - 0.0115" DIA TWIST DRILL -  #84  - 118 DPA - RH
DR#85.TLL   - 0.0110" DIA TWIST DRILL -  #85  - 118 DPA - RH
DR#86.TLL   - 0.0105" DIA TWIST DRILL -  #86  - 118 DPA - RH
DR#87.TLL   - 0.0100" DIA TWIST DRILL -  #87  - 118 DPA - RH
DR#88.TLL   - 0.0095" DIA TWIST DRILL -  #88  - 118 DPA - RH
DR#89.TLL   - 0.0091" DIA TWIST DRILL -  #89  - 118 DPA - RH
DR#90.TLL   - 0.0087" DIA TWIST DRILL -  #90  - 118 DPA - RH
DR#91.TLL   - 0.0083" DIA TWIST DRILL -  #91  - 118 DPA - RH
DR#92.TLL   - 0.0079" DIA TWIST DRILL -  #92  - 118 DPA - RH
DR#93.TLL   - 0.0075" DIA TWIST DRILL -  #93  - 118 DPA - RH
DR#94.TLL   - 0.0071" DIA TWIST DRILL -  #94  - 118 DPA - RH
DR#95.TLL   - 0.0067" DIA TWIST DRILL -  #95  - 118 DPA - RH
DR#96.TLL   - 0.0063" DIA TWIST DRILL -  #96  - 118 DPA - RH
DR#97.TLL   - 0.0059" DIA TWIST DRILL -  #97  - 118 DPA - RH


LETTER SIZE DRILLS - JOBBERS LENGTH

DRLA.TLL    - 0.2340" DIA TWIST DRILL -   A   - 118 DPA - RH
DRLB.TLL    - 0.2380" DIA TWIST DRILL -   B   - 118 DPA - RH
DRLC.TLL    - 0.2420" DIA TWIST DRILL -   C   - 118 DPA - RH
DRLD.TLL    - 0.2460" DIA TWIST DRILL -   D   - 118 DPA - RH
DRLE.TLL    - 0.2500" DIA TWIST DRILL -   E   - 118 DPA - RH
DRLF.TLL    - 0.2570" DIA TWIST DRILL -   F   - 118 DPA - RH
DRLG.TLL    - 0.2610" DIA TWIST DRILL -   G   - 118 DPA - RH
DRLH.TLL    - 0.2660" DIA TWIST DRILL -   H   - 118 DPA - RH
DRLI.TLL    - 0.2720" DIA TWIST DRILL -   I   - 118 DPA - RH
DRLJ.TLL    - 0.2770" DIA TWIST DRILL -   J   - 118 DPA - RH
DRLK.TLL    - 0.2810" DIA TWIST DRILL -   K   - 118 DPA - RH
DRLL.TLL    - 0.2900" DIA TWIST DRILL -   L   - 118 DPA - RH
DRLM.TLL    - 0.2950" DIA TWIST DRILL -   M   - 118 DPA - RH
DRLN.TLL    - 0.3020" DIA TWIST DRILL -   N   - 118 DPA - RH
DRLO.TLL    - 0.3160" DIA TWIST DRILL -   O   - 118 DPA - RH
DRLP.TLL    - 0.3230" DIA TWIST DRILL -   P   - 118 DPA - RH
DRLQ.TLL    - 0.3320" DIA TWIST DRILL -   Q   - 118 DPA - RH
DRLR.TLL    - 0.3390" DIA TWIST DRILL -   R   - 118 DPA - RH
DRLS.TLL    - 0.3480" DIA TWIST DRILL -   S   - 118 DPA - RH
DRLT.TLL    - 0.3580" DIA TWIST DRILL -   T   - 118 DPA - RH
DRLU.TLL    - 0.3680" DIA TWIST DRILL -   U   - 118 DPA - RH
DRLV.TLL    - 0.3770" DIA TWIST DRILL -   V   - 118 DPA - RH
DRLW.TLL    - 0.3860" DIA TWIST DRILL -   W   - 118 DPA - RH
DRLX.TLL    - 0.3970" DIA TWIST DRILL -   X   - 118 DPA - RH
DRLY.TLL    - 0.4040" DIA TWIST DRILL -   Y   - 118 DPA - RH
DRLZ.TLL    - 0.4130" DIA TWIST DRILL -   Z   - 118 DPA - RH


